Skip to content
Foundations, flatwork and stamped concrete (708) 578-2902
Concrete Contractor Hickory Hills logo

Decorative finishes

Stamped Concrete in Hickory Hills

The look of stone. The strength of one solid slab. Colors picked to suit your house.

Tan stamped concrete with an ashlar stone pattern

Stone Look, Concrete Strength

Good stamped concrete fools people. Bad stamped concrete looks like gray slab with a pattern dragged across it. The gap between them is timing and hand work. The slab starts like every other one we pour: old material out, stone base compacted, proper thickness, steel where needed. Then the decorative work begins. Pigment gets blended in or dusted on. Then antiquing release, for shading. Mats are pressed in when the concrete is stiff enough to hold a sharp texture but soft enough to take it. Finishers hand-texture the borders so the pattern does not quit at the boards. Joints are cut along grout lines where they disappear. Once cured: wash, then seal. On walking areas, a fine grit goes in the sealer for footing. Samples come with us, held up against your brick and trim. Raised ranches in Hickory Hills often have a front entry and a back yard that both suit a stone look, and we help you decide where the money is best spent.

Stamped Work Includes

What turns plain concrete into convincing stone.

  • Pattern choice

    Slate, ashlar, cobble or wood grain, picked with your house in view.

  • Color match

    Base color and accent tone to sit well with brick and siding.

  • Structural base

    Same stone base and slab depth as any plain pour.

  • Release shading

    A darker powder that collects in the low spots.

  • Sharp impressions

    Mats pressed at the right moment. Not too early, not too late.

  • Hand-worked edges

    Borders and corners textured where big mats cannot reach.

  • Hidden joints

    Cuts placed in grout lines, not across the stones.

  • Sealer at the end

    Applied after curing, with grit on walking surfaces.

Stamped Pour, Step by Step

  1. Choose and price

    Pattern and colors picked, area measured, written price with base, depth, color and sealing listed.

  2. Prep and place

    Old concrete or sod removed, stone compacted, forms set, colored concrete poured and floated.

  3. Stamp and seal

    Release on, mats pressed, edges detailed, joints cut. After the cure, cleaned and sealed.

Why Our Stamped Work Looks Real

  • Patient timing

    We wait for the right stiffness. That is where clean texture comes from.

  • Colors that belong

    Tones chosen against your exterior, not picked from one stock chart.

  • Strength underneath

    Decorative or not, the base and depth do not change.

  • Samples on site
  • Hand-textured borders
  • Cuts in grout lines
  • Grit in the sealer

Want Stone Without the Stone Price?

Describe the spot and the style you are after. The crew lead will bring pattern ideas and color options that suit your house.